Our Memories

DIMM DDR4 2400MHz C17 4GB

Brand: S3+

SODIMM DDR4 2400MHz C17 4GB

Brand: S3+

DIMM DDR4 2400MHz C17 8GB

Brand: S3+

SODIMM DDR4 2400MHz C17 8GB

Brand: S3+

DIMM DDR4 2400MHz C17 16GB

Brand: S3+

DIMM DDR4 2400MHz C17 4GB
Description:
S3+ is a 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight of 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4- 2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Specifications

– Form factor of 2280 M.2 (80 mm in length)
– Capacity up to 960 GB
– Flash NAND MLC
– Anti-Shock1500G
– Sequential Read Speed up to 550 MB / sec and sequential write speed up to 450 MB / sec

DIMM DDR4 2400MHz C17 8GB
Description:
S3+ is a 512M x 64bit (8GB) DDR4 2400 CL17 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 512M x 16 bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4 2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Specifications

– Form factor of 2280 M.2 (80 mm in length)
– Capacity up to 960 GB
– Flash NAND MLC
– Anti-Shock1500G
– Sequential Read Speed up to 550 MB / sec and sequential write speed up to 450 MB / sec

DIMM DDR4 2400MHz C17 16GB
Description:
S3+ is a 2Gx 64-bit (16GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Specifications

– Form factor of 2280 M.2 (80 mm in length)
– Capacity up to 960 GB
– Flash NAND MLC
– Anti-Shock1500G
– Sequential Read Speed up to 550 MB / sec and sequential write speed up to 450 MB / sec

SODIMM DDR4 2400MHz C17 4GB
Description:
S3+ 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4- 2400 timing of 17-17-17 at 1.2V. This 260-pin DIMM uses gold contact fingers.

Specifications

– Form factor of 2280 M.2 (80 mm in length)
– Capacity up to 960 GB
– Flash NAND MLC
– Anti-Shock1500G
– Sequential Read Speed up to 550 MB / sec and sequential write speed up to 450 MB / sec

SODIMM DDR4 2400MHz C17 8GB
Description:
S3+ 1G x 64-bit (8GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. This 260-pin DIMM uses gold contact fingers.

Specifications

– Form factor of 2280 M.2 (80 mm in length)
– Capacity up to 960 GB
– Flash NAND MLC
– Anti-Shock1500G
– Sequential Read Speed up to 550 MB / sec and sequential write speed up to 450 MB / sec

© Copyright - Saltek LLC All rights reserved.